Quantification of miRNA by SYBR Green qPCR: Difference between revisions
Jump to navigation
Jump to search
Davebridges (talk | contribs) Added link to Pfeffer article |
Davebridges (talk | contribs) Added RNA tailing |
||
Line 3: | Line 3: | ||
[[ Category: Transcription ]] | [[ Category: Transcription ]] | ||
__NOTOC__ | __NOTOC__ | ||
see [[ SOP - Chloroform ]] for safety information about working with Chloroform. | |||
This is adapted from [http://dx.doi.org Yang ''et al'' 2010] | This is adapted from [http://dx.doi.org Yang ''et al'' 2010] | ||
==Materials== | ==Materials== | ||
* Purify total RNA, via the protocol: [[ Purification of miRNA and mRNA with TRIzol ]] | * Purify total RNA, via the protocol: [[ Purification of miRNA and mRNA with TRIzol ]] | ||
* PolyA polymerase (NEB cat# M0276S) | |||
* Phenol/Choroform mixture (1:1 ratio) | |||
* 3M Sodium acetate pH 5.2 | |||
* Isopropanol | |||
* Superscript III reverse transcriptase (Life Technologies Catalog # 18080093) | * Superscript III reverse transcriptase (Life Technologies Catalog # 18080093) | ||
* Oligo dT Adapter Primer '''5'GCGAGCACAGAATTAATACGACTCACTATAGGTTTTTTTTTTTTVN-3''', dissolved to 50 uM | * Oligo dT Adapter Primer '''5'GCGAGCACAGAATTAATACGACTCACTATAGGTTTTTTTTTTTTVN-3''', dissolved to 50 uM | ||
Line 13: | Line 20: | ||
==Protocol== | ==Protocol== | ||
===PolyA Tailing of RNA=== | |||
* Incubate at 37°C for 1 hour. Components include | |||
** 1 ug RNA | |||
** 2 uL 10X polymerase reaction buffer | |||
** 2 uL ATP (10 mM, comes with polymerase) | |||
** 1 uL poly(A) polymerase | |||
** ddH2O to a final volume of 20 uL | |||
* Add 160 uL Water, 20 uL of 3 M sodium acetate, pH 5.2 and 200 uL of phenol/chloroform to tailed RNA, mix by tapping to form an emulsion | |||
* Centrifuge for 1 min on max to separate layers | |||
* Transfer the upper (aqueous) layer to a clean tube. Add 200 uL chloroform and mix, spin and extract aqueous layer to a new tube twice to remove the excess phenol | |||
* Add 140 uL of isopropanol, mix and incubate 5 minutes. Centrifuge 15 minutes on max. Aspirate supernatant being careful not to touch the pellet and air dry for 5-10 mins | |||
* Reedissolved in 25 μL of water | |||
===Reverse Transcriptase=== | ===Reverse Transcriptase=== | ||
Line 19: | Line 39: | ||
** 1 uL of Oligo dT Primer | ** 1 uL of Oligo dT Primer | ||
** 1uL of dNTP | ** 1uL of dNTP | ||
** | ** 6uL of tailed RNA | ||
** Sterile water | ** 5 uL Sterile water | ||
* Heat at 65C for 5 minutes | * Heat at 65C for 5 minutes | ||
* Briefly centrifugre then add (per reaction): | * Briefly centrifugre then add (per reaction): |
Revision as of 19:01, 10 January 2017
see SOP - Chloroform for safety information about working with Chloroform.
This is adapted from Yang et al 2010
Materials
- Purify total RNA, via the protocol: Purification of miRNA and mRNA with TRIzol
- PolyA polymerase (NEB cat# M0276S)
- Phenol/Choroform mixture (1:1 ratio)
- 3M Sodium acetate pH 5.2
- Isopropanol
- Superscript III reverse transcriptase (Life Technologies Catalog # 18080093)
- Oligo dT Adapter Primer 5'GCGAGCACAGAATTAATACGACTCACTATAGGTTTTTTTTTTTTVN-3, dissolved to 50 uM
- dNTP Mixture (10 mM of each)
- Reverse Adapter Sequence 5'GCGAGCACAGAATTAATACGACTCAC-3
- Mature miRNA Primer
Protocol
PolyA Tailing of RNA
- Incubate at 37°C for 1 hour. Components include
- 1 ug RNA
- 2 uL 10X polymerase reaction buffer
- 2 uL ATP (10 mM, comes with polymerase)
- 1 uL poly(A) polymerase
- ddH2O to a final volume of 20 uL
- Add 160 uL Water, 20 uL of 3 M sodium acetate, pH 5.2 and 200 uL of phenol/chloroform to tailed RNA, mix by tapping to form an emulsion
- Centrifuge for 1 min on max to separate layers
- Transfer the upper (aqueous) layer to a clean tube. Add 200 uL chloroform and mix, spin and extract aqueous layer to a new tube twice to remove the excess phenol
- Add 140 uL of isopropanol, mix and incubate 5 minutes. Centrifuge 15 minutes on max. Aspirate supernatant being careful not to touch the pellet and air dry for 5-10 mins
- Reedissolved in 25 μL of water
Reverse Transcriptase
- Reverse-transcribed into first-strand cDNA using Superscript III transcriptase (Invitrogen) with the oligo-dT adapter primer
- Add to a PCR tube (this is per reaction):
- 1 uL of Oligo dT Primer
- 1uL of dNTP
- 6uL of tailed RNA
- 5 uL Sterile water
- Heat at 65C for 5 minutes
- Briefly centrifugre then add (per reaction):
- 4 uL 5X First Strand Buffer
- 1 uL 0.1M DTT
- 1 uL RNAseOUT
- 1 uL of Superscript III RT
- Mix gently by pipetting and place in the PCR machine for the following program:
- Incubate at 50C for 60 min
- Inactivate by heating at 70C for 15 min
qPCR
- Try 50ng of cDNA was as a template in each reaction (1/10th of the cDNA mixture).
- The reverse primer was from the adapter sequence: 5'GCGAGCACAGAATTAATACGACTCAC3' and the forward primers were specific to miRNA mature sequences.
- The SYBR Green-based real-time PCR was performed to quantify miRNA expression, and U6 can be used for normalization.
- Can use a protocol similar to the QPCR for mRNA quantification