Connect to Network Drives: Difference between revisions

Latest revision as of 15:49, 22 December 2009

Right click on My Computer and then click on Map Network Drive
Change the drive letter to what you want (Suggested S: for groups, H: for home and T: for temp, but you can make these whatever you want)
Under folder type \\adenosine.lsi.umich.edu\groups
Click on Connect using a different user name
Enter LSI\uniqname where uniqname is your name
Enter your password, and ensure that Reconnect at logon is checked
Repeat steps 3-6 for other drives, replacing groups with home and temp respectively.

@@ Line 1: / Line 1: @@
 ==For Windows==
-*Right click on my computer and then click on Map Network Drive
+#Right click on '''My Computer''' and then click on Map Network Drive
-*Change the drive letter to what you want (Suggested S: for groups, H: for home and T: for temp, but you can make these whatever you want)
+#Change the drive letter to what you want (Suggested S: for groups, H: for home and T: for temp, but you can make these whatever you want)
-*Under folder type '''\\adenosine.lsi.umich.edu\groups'''
+#Under folder type '''\\adenosine.lsi.umich.edu\groups'''
-*Click on '''Connect using a different user name'''
+#Click on '''Connect using a different user name'''
-*Enter '''LSI\uniqname''' where uniqname is your name
+#Enter '''LSI\uniqname''' where uniqname is your name
-*Enter your password, and ensure that '''Reconnect at logon''' is checked
+#Enter your password, and ensure that '''Reconnect at logon''' is checked
-*Repeat steps 3-6 for other drives, replacing groups with home and temp respectively.
+#Repeat steps 3-6 for other drives, replacing '''groups''' with '''home''' and '''temp''' respectively.